8/18/2023 0 Comments Vddp voltage control![]() Your screen should look something like this: To modify voltages, go to the Advanced Voltage Settings, which can be found under the Advanced Frequency Settings tab. If your computer failed to start at the 3.7 GHz clock ratio or if you’ve gone to a higher frequency (3.9 GHz), you’re going to have to increase the CPU core voltages. If it shuts on and off more than six times, it will prompt you with a message that the overclock failed and will direct you back to the BIOS. NOTE: Your motherboard might cycle on and off a few times after modifying settings, this is normal. Hit F10 to save settings and quit to boot your computer back into Windows and run your benchmarks. Leave SMT Mode, Downcore Control and Opcache Control at their Default settings. Cool&Quiet simply limits fan speed and C-state Control basically sends a command to your CPU to use less power when it thinks the processor is idle, since we don’t want to limit the power or fan speed, we’re going to disable them. Next, we’re going to Disable the AMD Cool&Quiet function and Disable the Global C-state Control. This will prevent the frequency from fluctuating, ensuring that it stays at a constant 3.7 GHz. Under this setting we’re going to set Core Performance Boost to Disabled.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |